wHEEL FITMENT MEASUREMENT GUIDE

This guide is provided to aid in wheel fitment using our BBK. The measurements stated are the MINIMUM required for our calipers.

While this guide can be used for various wheels we do not guarantee fitment using these measurements on any wheels other than OEM AP2V2 wheels.

Proper CLEARANCE can be obtained on any wheel using the APPROPRIATE spacer.

We offer spacers with INTEGRATED studs in our store.

20180304_123548.jpg

measurement 1

The first measurement is taken from the verticle casting mark in the center of the caliper stay to the backside of the wheel spoke. MINIMUM CLEARANCE 56MM

20180304_123412.jpg

MEASUREMENT 2

The second measurement is taken from the inner most casting mark at the second 45 degree angle on the caliper stay to the backside of the wheel spoke. MINIMUM CLEARANCE 47MM

20180304_123616.jpg

MEASUREMENT 3

The third measurement is taken at the 90 degree notch where the casting mark ends on the caliper stay to the back side of the wheel spoke. MINIMUM CLEARANCE 50MM